Celestica Documentation Portal

Find your product documents here

Firmware Upgrade

SE4200 supports upgrading the firmware and configuration binary file through UART.

Note: Since SE4200 firmware has changed the flash layout of the MSCC standard Alpha Candidate release codebase, it does not support upgrading firmware from previous versions or codebases directly to Rev 0.5.0.
  1. From the Tera Term CLI type "fw_update" and press Enter.
    Figure 1. Firmware update command
  2. Select File > Transfer > XMODEM > Send. Then select firmware or configuration binary file.
    Figure 2. Sending firmware file
  3. Wait for transfer to complete. Once done, choose Reset or power-cycle the storage expansion device to activate the new firmware and configuration.
    Figure 3. File transfer complete and reset.