Celestica Documentation Portal

Find your product documents here

Complex Programmable Logic Device (CPLD)

The CPLD can be upgraded via the serial port. To do so you must first establish a CLI connection. See: Connecting to Console

CPLD Upgrading

Note: The CPLD upgrade process includes two phases: 1. Downloading the CPLD file and 2.Installing the upgrade. The upgrade installation process takes approximately three minutes. After which a power cycle of the canister must be performed.
  1. Within Tera Term type "cmdsvr_mode 1" and "fdl 4 0 y", then choose "File > Transfer > XMODEM > Send.

  2. Select appropriate .bin file to update. Once finished, the screen will display "Buffer Download Complete".

  3. Type "cmdsvr_mode 0" and "cpld upgrade" to upgrade the CPLD. This process takes approximately three minutes.

  4. The upgrade is complete when "PASS" is displayed on screen.

  5. Power cycle the canister/unit to apply CPLD upgrade.

  6. Type "fru get" to verify new version of CPLD.

  7. Repeat these steps to apply updates to other canisters.