Installing Rail Kit into a Rack
- Extend the rail until it is locked (Click!) and pull white tab forward to remove the inner rail.
Figure 1. 
- Push tab to slide the middle rail as shown in 2a to retract the rail.
Figure 2. 
- Adjust mounting bracket length to fit flush within the rack.
Figure 3. 
- Swing open the latch hook, align the tool free rack mount pin with the rack post, and pull forward.Note: Please repeat installation step(s) for the other side.
Figure 4. 
Figure 5. 
- Secure front bracket to post with included 1 (A)
M5 screw with torque value 22-25 lbf-in. (G) screw is for rack shipment only.
Figure 6. 
- Secure rear bracket to post with included two (2) M5 screws (E) or (F) with torque value 22-25 lbf-in. (E) screws are for square hole racks and (F) screws are for circle hole racks.Note: Please repeat installation steps for the other side.
Figure 7. 
- Mount the rail R to the rail kit with two (2) M4 screws (D).Note: Please repeat installation step for the other side.
Figure 8. 
Figure 9. 