Drive LEDs
The SD4100 drive carriers support 3.5" form factor drives.
Note: Drives can be replaced without powering off. Leave the enclosure powered on.
Important: Ensure a minimum of a five (5) second delay between removal of a drive and installation of another.
CAUTION: All drive bays not populated with drives must have blanks installed to ensure proper airflow.
Note: Check the drive LEDs for activity before removing it from the enclosure. Failure to do so may result in data loss.
Drive Status LEDs
Drive LED Descriptions
| LED Name | LED Color | LED Status | Description |
|---|---|---|---|
|
Activity LED |
Green |
ON |
LED status is controlled by the drive. Please refer the drive manufacturer for LED status definitions. |
|
OFF | |||
|
Blink | |||
|
Fault LED |
Amber |
ON |
Drive fault |
|
OFF | Normal operation without drive fault | ||
|
Blink |
Re-build / Identify |