home

Storage

NetworkingStorageSoftwareSupport and Services
NetworkingStorageSoftwareSupport and Services

Celestica Documentation Portal

Find your product documents here

Show Contents

thumbnailStorage

SC6110

CPU Removal

  1. Remove the CPU heatsink using a Torx T20 bit driver. Unscrew the heat sink in the following sequence: 6,5,4,3,2,1.
  2. Remove the CPU heatsink from the CPU socket.
    Important: Each time the CPU heatsink is removed, ensure the old thermal paste is thoroughly removed and a fresh layer is applied before re-installation.
  3. Unscrew the captive screw and open the CPU socket frame.
  4. Remove the CPU from the socket.
  5. Install the plastic cover to protect the CPU socket after removal.
  6. Close the CPU socket frame and torque the captive screw to 13.8 kgf-cm (12 in-lbs).

Last updated: February 20, 2026