show ip ospf vrf neighbor

Displays OSPF neighbor list for specific VRF.


Syntax	`show ip ospf vrf <vrfname> neighbor [<A.B.C.D>\|detail [all]\|all\|<IFNAME>]`
Command mode	EXEC
Parameters	`vrfname` – VRF Name. Maximum: 15 characters, prefixed with Vrf. `A.B.C.D` – Neighbor ID as an IP address. `IFNAME` – Interface name (Example: Ethernet1, Vlan1, PortChannel1).
Usage	None
Supported Releases	1.1.0 or later
Click command	None
Example `sonic# show ip ospf vrf Vrf-20 neighbor VRF Name: Vrf-20 Neighbor ID Pri State Dead Time Address Interface RXmtL RqstL DBsmL 1.1.1.1 1 Full/Backup 37.394s 20.20.20.1 Ethernet8:20.20.20.2 0 0 0`

Celestica Documentation Portal