show ip ospf vrf all neighbor

Displays OSPF neighbor list for all VRFs.


Syntax	`show ip ospf vrf all neighbor [<A.B.C.D>\|detail\|all\|<IFNAME>]`
Command mode	EXEC
Parameters	`A.B.C.D` – Neighbor ID as an IP address. `IFNAME` – Interface name (Example: Ethernet1, Vlan1, PortChannel1).
Usage	None
Supported Releases	1.1.0 or later
Click command	None
Example `sonic# show ip ospf vrf all neighbor VRF Name: Vrf-20 Neighbor ID Pri State Dead Time Address Interface RXmtL RqstL DBsmL 1.1.1.1 1 Full/Backup 37.766s 20.20.20.1 Ethernet8:20.20.20.2 0 0 0 VRF Name: Vrf-2 Neighbor ID Pri State Dead Time Address Interface RXmtL RqstL DBsmL 11.11.11.1 1 Full/Backup 31.650s 2.2.2.1 Ethernet9:2.2.2.2 0 0 0 OSPF instance not found`

Celestica Documentation Portal