show interface status

Displays information of one or all interfaces.


Syntax	`show interface status [Ethernet <if-id>]`
Command mode	EXEC
Parameters	`if-id` – Range of interface identification numbers separated by comma or hyphen.
Usage	Use `show interface status` to display all the interface information.
Supported Releases	1.1.0 or later
Click command	`show interface status [Ethernet <if-id>]`
Example sonic# show interface status Ethernet 1,2,3 ------------------------------------------------------------------------------------------------------------------------------------------------- Name Description Admin Oper Speed MTU FEC LANES ALIAS VLAN TYPE ASYM PFC ------------------------------------------------------------------------------------------------------------------------------------------------- Ethernet1 - up down 1GB 9100 DISABLED 25 Ethernet1/0/2 routed N/A N/A Ethernet2 - up down 1GB 9100 DISABLED 28 Ethernet1/0/3 routed N/A N/A Ethernet3 - up down 1GB 9100 DISABLED 27 Ethernet1/0/4 routed N/A N/A

Celestica Documentation Portal