show interface breakout

Displays breakout information of one or all interfaces.


Syntax	`show interface breakout [Ethernet <if-id>]`
Command mode	EXEC
Parameters	`if-id` – Interface identification number.
Usage	Use `show interface breakout` to display breakout information of all interfaces.
Supported Releases	1.1.0 or later
Click command	`show interface breakout`
Example sonic# show interface breakout Ethernet 8 Ethernet8: Breakout modes: 1x100G(4): ['Eth2/1'] 1x400G: ['Eth2/1'] 1x40G(4): ['Eth2/1'] 2x100G: ['Eth2/1', 'Eth2/5'] 2x40G: ['Eth2/1', 'Eth2/5'] 4x100G: ['Eth2/1', 'Eth2/3', 'Eth2/5', 'Eth2/7'] 4x10G(4): ['Eth2/1', 'Eth2/2', 'Eth2/3', 'Eth2/4'] 4x25G(4): ['Eth2/1', 'Eth2/2', 'Eth2/3', 'Eth2/4'] Child ports: Ethernet8 Child port speed: 400G Current breakout mode: 1x400G Default breakout mode: 1x400G Autoneg: off Fec: rs Lanes: 41,42,43,44,45,46,47,48 Index: 2,2,2,2,2,2,2,2

Celestica Documentation Portal