Installing Chassis into Slide Rail
- Attach M4 standoff screws with Philips screwdriver, which is provided in accessory kit, on the chassis.Note: There are 4 pieces in each side, 8 in total.
- Attach the inner sliders of rail to the chassis. Two inner sliders are provided.
- Attach ear-kit with screws provided in the accessory kit.
- Use the latch to attach the outer sliders and install the outer sliders on the rack.
- Ensure that the inner and outer sliders of the slide rail are aligned. Push the system into the rack. Fasten the thumb screws. Ensure there is adequate clearance around the switch to maintain proper air circulation.