Drive Carrier
Overview
The drive carrier is designed to support both 2.5 inch and 3.5 inch drives.
Note: The SD6200 requires a minimum installation of fifteen (15) HDDs. Unused drive bays do not require a blank drive carrier and may remain empty.
Drive Carrier LEDs
There are two indicators on the front face. One shows drive link/active status. The other one is the drive fault LED.
- Top LED: Drive Active/Ready (Green). Controlled directly by each drive.
- Bottom LED: Drive Fault/Status (Amber).
- Solid On – Drive fault
- Blink @ 4Hz – Locate 1st priority
- On – Drive fault 2nd priority
- Blink @ 1Hz – Rebuild 3rd priority
- Off – Normal operation