This documentation addresses European Union (EU) Ecodesign requirements for servers and storage products. All data and ratings within this file are in reference only to SC6110 product(s). The below information conforms with requirements laid down in Annex II of the Commission Regulation 2019/424.

3(1)(a): Product type: 2U All Flash Array Storage Controller

3(1)(b): manufacturer's address:

Celestica (Thailand) Co.,Ltd

49/18 Laem Chabang Industrial Estate, Moo 5, Tungsukhla Siracha, Chonburi 20230, Thailand.

Celestica Platform and Cloud Solutions

Malaysia Sdn. Bhd.

Plot 1, No. 13

Jalan Hi-Tech 9/1

Zon Industri Fasa 3A

Kulim Hi-Tech Park, Kulim, Kedah

Malaysia 09090

3(1)(c): product model number: SC6110

3(1)(d): See the serial number on the physical system to determine the year of manufacture.

3(1)(e-j): PSU Efficiency and Power Factor Value (Table) (From 80 Plus report)

SC6110 PSU meets from March 1, 2025

PSU Model #: TDPS-3000BB A

System (EUT) Efficiency in Idle State Power (Table)

System (EUT) Efficiency in Active State Power (Table)

3(1)(k):

This product has been tested in order to verify that it will function within the boundaries (such as temperature and humidity) of the declared operating condition class: A2 (5~35C).

3(1)(I): The idle state power at the higher boundary temperature of the operating conditions class is A3

3(1)(m): NA

3 (1)(n): FW and Secure Data Deletion Tool (Firmware, security update requirements, and secure data deletion requirements) To safely delete data the OS level software controlled by the customer must be used. Celestica will support firmware per Erp requirements "free of charge or at a fair, transparent and non-discriminatory cost."

Delete data from drives

To delete user data from drives, use the following command from the host:

sg_sanitize

Example:

sg_sanitize -O --zero /dev/sg[number] or /dev/sd[number]

Delete data from the enclosure

Use enclosure CLI

Restore factory defaults

3(1)(o): List of recommended combinations of blade servers with chassis: NA

3(1)(p): List of all current SKUs within this product family: SC6110 with Dual-Canister AC PSU,W BMC, Branded

3(3)(b): Please see the disassembly instructions in the SC6110 Installation Guide.

Commands to delete user data

Delete data from drives

To delete user data from the drives, use the below command from the Host

sg_sanitize

Eg.

sg_sanitize -O --zero /dev/sg[number] or /dev/sd[number]

The operation will take hours to complete

The progress can be checked using the sg_requests command.

Delete data from the enclosure

Use enclosure CLI

restore factory-defaults