Celestica Documentation Portal

Find your product documents here

Controller Fan Removal

  1. Open the top cover of the controller:
    1. Rotate the M3 captive thumbscrew anticlockwise using a PH#2 bit.
    2. Press down the button (b1) while sliding the cover (b2) towards the back of the controller.
  2. Remove the air baffle.
  3. Unscrew the four (4) T10 Torx screws and one (1) PH#1 screw from bracket and remove.
  4. Unplug the fan cable. (Not shown)
  5. Pull and lift up to remove fan from the controller.