Accessory Rail Kit Installation

The Accessory Rail Kit Installation guide provides step-by-step instructions for mounting the chassis into a rack using the rail kit, including adjustments for different rack post types and securing the chassis in place.

Rail kit

This section covers the installation of the chassis into a rack using the rail kit.

Note: The rail kit comes with screw pins for round rack posts. For square rack posts, use the provided Pan M5 X10 screws (D=9.2mm, 8 pcs).

The rail kit (length: 670mm) can be extended (length: 870mm) to suit the length of rack posts.

For suqare type rack post Screw pins

Rotate 2 springs to open,
Install the rail on the rack,
Rotate 2 springs back to the original position.

Note: Repeat the above steps for both sides.

Step 2: Before installing the chassis into the rack, remove the left and right ear bezels. Place the chassis on the rail and slide it into position.

Remove the ear bezel

Step 2

Step 3: Secure the chassis to the front rack by tightening the thumbscrews and one M5 black screw from the accessory bag. Fasten the rear rail to the rack using two M5 black screws from the accessory bag.

Step 3