Configure Traffic Class to DSCP map entries

Configures the traffic class to dscp map entries.


Syntax	`traffic-class <tc-values> dscp <dscp>`
Command mode	QoS Map Configuration
Parameters	`tc-values` – Enter the traffic class values as a range or/and comma separated list, that is, (-) or (,) separated individual tc and range of tc. Example: 0,2-7. `dscp` – Enter the DSCP value to be mapped to the traffic class(es).
Usage	Use `no traffic-class <tc-values>` to unconfigure a qos mapping and reset it to default mapping.
Supported Releases	1.0.0 or later
Click command	None
Example `sonic(config-tc-dscp-MAP1)# traffic-class 2-4 dscp 3 sonic(config-tc-dscp-MAP1)# no traffic-class 5`

Celestica Documentation Portal