hello-multiplier

Sets the delay interval minimal config.

Minimal 1s dead-interval with fast sub-second hellos.


Syntax	`ip ospf dead-interval minimal hello-multiplier <num>`
Command mode	Interface (Ethernet, PortChannel, VLAN and Loopback)
Parameters	`num` – Number of Hellos to send each second. Range: 1 – 10.
Usage	Use `no ip ospf dead-interval minimal hello-multiplier <num>` to remove the configuration.
Supported Releases	1.1.0 or later
Click command	None
Example `sonic(conf-if-Ethernet8)# ip ospf dead-interval minimal hello-multiplier 5 sonic(conf-if-Ethernet8)# no ip ospf dead-interval minimal hello-multiplier 5`

Celestica Documentation Portal