auto-cost

Calculates OSPF interface cost according to bandwidth.


Syntax	`auto-cost reference-bandwidth <bandwidth>`
Command mode	Router OSPF
Parameters	`bandwidth` – Reference bandwidth in terms of Mbits per second. Range: 1 – 4294967.
Usage	Use `no auto-cost reference-bandwidth <bandwidth>` to remove the configuration.
Supported Releases	1.1.0 or later
Click command	None
Example `sonic(config-router)# auto-cost reference-bandwidth 4 sonic(config-router)# no auto-cost reference-bandwidth 4`

Celestica Documentation Portal