neighbor shutdown

Specifies neighbor router; Administratively shutdown this neighbor.


Syntax	`neighbor <neigh_addr> \| <l3_intf> \| <neigh_tag> shutdown [message <msg>\|rtt <rt_time>]`
Command mode	Configure-router-bgp-view
Parameters	`neigh_addr` – IPv4 or IPv6 Neighbor address. `l3_intf` – L3 Interface. `neigh_tag` – Neighbor tag. `msg` – Shutdown message (RFC 8203). `rt_time` – Shutdown if round-trip-time is higher than expected.
Usage	Use `no neighbor <neigh_addr> \| <l3_intf> \| <neigh_tag> shutdown [message <msg>\|rtt <rt_time>]` to remove the configuration.
Supported Releases	1.0.0 or later
Click command	None

Celestica Documentation Portal