lldp tlv-select

Configures to enable TLVs in the LLDP transmit packets.


Syntax	`lldp tlv-select {management-address \| system-capabilities}`
Command mode	CONFIG
Parameters	`management-address/system-capabilities` – TLVs to be enabled.
Usage	Use `no lldp tlv-select {management-address/system-capabilities}` to disable the TLV.
Supported Releases	1.0.0 or later
Click command	None
Example `sonic(config)# lldp tlv-select management-address sonic(config)# sonic(config)# lldp tlv-select system-capabilities sonic(config)# sonic(config)# no lldp tlv-select management-address sonic(config)# sonic(config)# no lldp tlv-select system-capabilities sonic(config)#`

Celestica Documentation Portal