DHCPv4 Relay Configuration

Configures DHCPv4 Relay address in VLAN.


Syntax	`ip helper-address <relay_address> [<relay_address>] [<relay_address>] [<relay_address>]`
Command mode	Interface mode (VLAN)
Parameters	`relay_address` – DHCPv4 Relay address (Maximum: 4).
Usage	Use `no ip helper-address <relay_address>` to remove the DHCPv4 Relay information.
Supported Releases	1.0.0 or later
Click command	`config vlan dhcp_relay add [OPTIONS] <vid> DHCP_RELAY_DESTINATION_IPS...`
Example `sonic(conf-if-Vlan100)# ip helper-address 1.1.1.1 sonic(conf-if-Vlan100)# no ip helper-address 1.1.1.1`

Celestica Documentation Portal