Adding Chassis to Rack
- Install square nuts onto rack
- Install floating nuts (provided in the accessory kit) onto 19" rack post holes as shown. Use a flat blade screwdriver to assist if needed. There are two (2) floating nuts for each rack post, amounting to eight (8) floating nuts in total.
- Install floating nuts (provided in the accessory kit) onto 19" rack post holes as shown. Use a flat blade screwdriver to assist if needed. There are two (2) floating nuts for each rack post, amounting to eight (8) floating nuts in total.
- Installing the chassis into the rackCAUTION: It is recommended to use two people to lift and align the chassis with the rack rails.
- The person standing in front of the rack will move the assembly into the desired location within the rack. Use the removable guide pins to align the assembly (Detail 1) to both sides, ensuring the left and right sides are level.
- Secure using two (2) of the provided M6 screws at each corner (Details 4,5).
- Both front corners (Detail 6) and rear corners (Detail 7) with two (2) M6 screws each.
- The person standing in front of the rack will move the assembly into the desired location within the rack. Use the removable guide pins to align the assembly (Detail 1) to both sides, ensuring the left and right sides are level.