LEDs
The ES1050/EG1050/ES1010 series front panel is equipped with various indicator lights, including a power supply indicator, fan status indicator, alarm indicator, system automatic diagnosis LED, Ethernet management port indicators, SFP indicator, Ethernet data port indicators, and SFP28 indicators. Details of these indicators are provided in the following tables.
| Indicator Light | Front Panel Sign | State | Meaning |
|---|---|---|---|
|
Power status LED |
PWR |
Green light always on |
Two PSUs power supply normal |
|
Amber light always on |
Any one of the PSUs status is error | ||
|
Off |
The system is powered off | ||
|
Fan status LED |
FAN |
Green light always on |
Three fans modules are normal |
|
Amber light always on |
Any one of the fans is absent, or any of the fan statuses is abnormal, fan status LED amber On. | ||
|
Off |
The system is powered off | ||
|
Alarm status LED |
ALM |
Green light always on |
The system is normal |
|
Amber light always on |
Critical alarm in system | ||
|
Green and Amber light Alternate 4Hz blinking |
Major alarm in system | ||
|
Green and Amber light Alternate 1Hz blinking |
Minor alarm in system | ||
|
Off |
The system is powered off | ||
|
System status LED |
STAT |
Green and Amber light Alternate blinking |
The system is normal |
|
Off |
The system is powered off |
| Indicator Light | Panel Sign | State |
|---|---|---|
|
ETHERNET port Activity light (right) |
Green light blinking |
The port is transmitting data |
|
Off |
There is no data transmitting on port | |
|
ETHERNET port Link light (left) |
Amber light always on |
The port is configured at 10M/100M speed |
|
Green light always on |
The port is configured at 2.5GbE speed | |
|
Off |
No connection or failure to connect | |
|
Indicator light of SFP Port |
Green light always on |
The port link at 1000M speed |
|
Green light blinking |
The port link at 1000M speed and activity | |
|
Off |
No connection or failure to connect |
| Indicator light | Panel Sign | State |
|---|---|---|
|
ETHERNET port Activity light (right) |
Green light Blink |
The port is transmitting data. Port PoE power disabled |
|
Amber light Blink |
The port is transmitting data. Port PoE power enabled | |
|
Amber light On |
There is no data transmitting on port. Port PoE power enabled | |
|
Alternate Blink Amber/Green for 1 minute |
Port PoE power denied. Port PoE power disabled | |
|
Off |
There is no data transmitting on port | |
|
ETHERNET port Link light (left) |
Green light always on |
For ES1010-48C and ES1010-48CP: The port link is active at 1GbE mode For ES1050-48C, ES1050-48CP and EG1050-48CP: The port link is active at 2.5GbE mode |
|
Amber light always on | For ES1010-48C and ES1010-48CP: the port link is active at 10/100M mode For ES1050-48C, ES1050-48CP and EG1050-48CP: the port link is active at 10/1000M mode | |
|
Off |
No connection or failure to connect | |
|
SFP28 port |
Green light always on |
The port link at 25GbE mode. There is no data transmitting on port |
|
Green light Blink |
The port link at 25GbE mode. The port is transmitting data | |
|
Amber light always on |
The port link at 1/10GbE mode. There is no data transmitting on port | |
|
Amber light Blink |
The port link at 1/10GbE mode. The port is transmitting data | |
|
Off |
No connection or failure to connect |
| Indicator LED | Rear Panel Sign | State | Meaning |
|---|---|---|---|
|
550W |
P-1/P-2 |
Green light always on |
PSU modules are normal |
|
Red light always on |
PSU detected an Error | ||
|
Off |
PSU module is powered off | ||
|
1600W |
P-1/P-2 |
Left light always Green on Right light always Green on |
Power supply DC outputs on and ok |
|
Left light is Green/0.5Hz flashing Right light always Green on |
AC present /Only standby outputs on | ||
|
Left light always Red on Right light always Green on |
Power supply failure, PSU shut down | ||
|
Left light always Green on Right light is Red/0.5Hz flashing |
One PSU is working normally, but the AC power supply of the other PSU is abnormal. |