QSFP-DD-Transceiver Installation
DS4000/DS4001 provides 32 QSFP-DD ports.
The procedure for installing the QSFP-DD transceiver is shown below:
-
Step 1: Put on a ESD wrist strap (or antistatic gloves)
-
Step 2: Insert the QSFP-DD transceiver to the guide rail inside the QSFP-DD port. Do not put the QSFP-DD transceiver up-side-down.
-
Step 3: Push the QSFP-DD transceiver along the guide rail gently until you feel the transceiver snap into place at the bottom of the QSFP-DD port.
Note: the QSFP-DD transceiver is hot swappable.
Caution!
Do not stare directly at the 2 fiber bore in the QSFP transceiver when the switch is in operation, otherwise the laser may hurt your eyes.
Attention !
Ne regardez pas directement les 2 orifices de la fibre de l’émetteur-récepteur QSFP lorsque le commutateur est en fonctionnement, au risque de vous blesser les yeux avec le laser.