QSFP28-Transceiver Installation

DS3001 provides 64 QSFP28 ports. The procedure for installing the QSFP28 transceiver is shown below:

Put on a ESD wrist strap (or antistatic gloves).
Insert the QSFP28 transceiver to the guide rail inside the QSFP28 port. Do not put the QSFP28 transceiver up-side-down.
Push the QSFP28 transceiver along the guide rail gently until you feel the transceiver snaps into place at the bottom of the QSFP28 port.
Note: The QSFP28 transceiver is hot swappable.
CAUTION: Do not stare directly at the 2 fiber bores in the QSFP transceiver when the switch is in operation. Otherwise, the laser may hurt your eyes.

Celestica Documentation Portal