PSU Specifications
Technical specifications, wattage configurations, and line-level redundancy behavior for DS1000 and power supply modules.
DS1000 supports redundant, hot-swappable AC power supply modules. The power supply supports input voltage from 100~240VAC at 50~60Hz VAC.
Note: The PSU AC input range is 100v to 264v RMS.
CAUTION: Only use PSUs with identical part numbers. Failure to do so will cause a system error.
550W Power Module
Two 550W PSUs are used in the DS2010.
- F2B P/N: R3194-PSA15-01(F2B airflow only)
In case of a fan fault on 550W PSUs, the modules shut off output power and require an AC power cycle to restore operation after the fault is cleared.