Cabling and Electricity Access
After the DS2000 switch is securely mounted into its rack, begin connecting the appropriate power and data cables in this order:
-
Connect power cables
-
Connect data cables
Connecting Power Cable(s)
Note: After powering on the chassis check that all LEDs are lighting normally. If not, check the cable connections or go to Troubleshooting Enclosure Startup Failure.
Connecting the Power Cable(s)
As shown in the illustration, power cables can be secured to the DS2000 by attaching the cable strap.
Note: The image displayed may be used as an example and not match this specific product.