Enable Pfc

Enables/disables the priority flow control mode on priority group.


Syntax	`priority-flow-control mode enable <pg-id>`
Command mode	Ethernet Interface
Parameters	`pg-id` – Priority-group identification number.
Usage	Use `no priority-flow-control mode enable <pg-id>` command to disable priority flow control for that pg on that interface.
Supported Releases	1.0.0 or later
Click command	None
Example `sonic(conf-if-Ethernet48)# priority-flow-control mode enable 3 sonic(conf-if-Ethernet48)# no priority-flow-control mode enable 3`

Celestica Documentation Portal