Software

Celestica Documentation Portal

Find your product documents here

Software

Software Contents

SONiC

CLI Reference Guide

Revision 1.1

Layer 3

FRR

OSPF6 Interface Commands

priority

Sets the router priority.


Syntax	`ipv6 ospf6 priority <prio>`
Command mode	Interface (Ethernet, PortChannel, VLAN and Loopback)
Parameters	`prio` – Priority. Range: 0 – 255.
Usage	Use `no ipv6 ospf6 priority <prio>` to remove the configuration.
Supported Releases	1.1.0 or later
Click command	None
Example `sonic(conf-if-Ethernet8)# ipv6 ospf6 priority 5 sonic(conf-if-Ethernet8)# no ipv6 ospf6 priority 5`

Last updated: February 28, 2025